Harmonic Ellipse 3000 - Recall Preset Files Menu

Chapter 3 Ellipse Management
© 2013 Harmonic Inc. Harmonic All rights reserved. 54 Ellipse 3000 Release 3.0, Rev. B
Preset Menu
3.3.1 Recall Preset Files Menu
The Recall menu allows recalling preset file to configure the Ellipse encoder with a previously
saved configuration.
The Recall Preset menu provides the following options:
■ The Select Preset Name option allows selecting a preset file to load.
This option displays a list of saved preset files, including the factory-default preset.
■ The Load Preset option allows loading the selected preset file.
This option executes the Load command, not leading to a new screen.
After executing the load command, the device automatically resets itself to activate the new
loaded configuration file. The screen displays a “unit initializing” notice with a status bar, showing
the initialization progress status.
Front Panel
To access the Recall menu on the front panel:
❖ Navigate Root > Preset > Recall.
Web Manager
To access the Recall menu in the Web Manager:
❖ Select Preset > Recall.
Recall
1 Select Preset Name
Preset-1.db
2 Load Preset