Harmonic Ellipse 3000 - Page 285

Chapter 10 Unit Configuration
© 2013 Harmonic Inc. Harmonic All rights reserved. 285 Ellipse 3000 Release 3.0, Rev. B
SNMP Traps Sub-Menu
10.4.1.2 IP Address
The IP Address parameter sets the trap-host IP address.
The available value is of IP address type: xxx.xxx.xxx.xxx.
Front Panel
To set the IP Address parameter on the front panel:
❖ Navigate Root > Configuration > Unit > SNMP Traps > Traps Destinations List > [Trap
Name] > IP Address.
Web Manager
To set the IP Address parameter in the Web Manager:
❖ Select Unit > SNMP Traps > [trap entry name].
10.4.1.3 UDP Port
The UDP Port parameter sets the trap-host UDP port.
The range is 0 to 65535.
Front Panel
To set the UDP Port parameter on the front panel:
❖ Navigate Root > Configuration > Unit > SNMP Traps > Traps Destinations List > [Trap
Name] > UDP Port.
Web Manager
To set the UDP Port parameter in the Web Manager:
❖ Select Unit > SNMP Traps > [trap entry name].
IP Address
100.001.001.010
UDP Port
00162
<00000 - +65535>