Chapter 9 Input Interface Configuration
© 2013 Harmonic Inc. Harmonic All rights reserved. 252 Ellipse 3000 Release 3.0, Rev. B
IP Input Menu (MPE input)
9.3.2.2 Node Subnet Mask (IP Input / Port Configuration)
The Node Subnet Mask parameter sets the IP Port subnet mask address. The available value is an
IP subnet mask address xxx.xxx.xxx.xxx.
Front Panel
To access Node Subnet Mask on the front panel:
❖ Navigate Root > Configuration > Inputs > IP Input > Port Configuration > Node Subnet
Mask.
Node Subnet Mask
255.255.255.240
To Next Page
Loading...
