Chapter 4 Transport Stream Configuration
© 2013 Harmonic Inc. Harmonic All rights reserved. 89 Ellipse 3000 Release 3.0, Rev. B
Services Sub-Menu/Tab
To set the Injected ID parameter on the front panel:
❖ Navigate
Root > Configuration > Transport Stream > Services > Service List > [Service Name]
BISS-E Injected configuration > Injected ID.
The available value is a 14-digit key defining the unit ID number. The Injected ID displayed is
always 00000000-000000.
Web Manager
To set the Encrypted Session Word and the Injected ID scrambling parameters for the BISS-E
Injected ID Scrambling mode in the Web Manager:
❖ Select Transport > Services > Service Name.
Injected ID
00000000-000000
To Next Page
Loading...
