Hatteras HN4000 User Manual

Rack Considerations 1-7
920550-5020 Rev 14 HN4000 Hardware Installation Guide
1.5 Rack Considerations
HN4000switchescanbemountedinthefollowingracktypeswiththeappropriatemounting
hardware:
❒ 19inchANSIrack(mountinghardwareprovided)
❒ 23inchANSIrack(mountinghardwareprovided)
❒ 600mmETSIrack(535mmmaximumpanelwidth)(mountinghardwareavailablein
RMK‐02kit)
1.6 Cabling and Wiring Requirements
Table1‐5liststhecablesusedwiththeHN4000equipment.Whereapartnumberisprovided,
thecablecanbeorderedfromHatterasNetworks.Theintra‐buildingwarningonpage 1‐8
appliestotheportsmarkedwithtwoasterisks(**).
Caution
The shielded cables specified in Table1‐5 must be grounded at both ends.
Table 1-5 HN4000 Cabling
From HN4000...
To... Cable Type Hatteras Networks
P/N
Powerport FusePanel Powercables(14‐18AWG(1.6‐1.0mm)) N/A
Groundlug CustomerDefined Groundcable(10‐14AWG(2.6‐1.6mm)) N/A
Dual100/1000BASE‐T
High‐SpeedEthernetModule**
CustomerDefined CAT‐5eshieldedcable N/A
Dual100BASE‐XorDual
1000BASE‐XHigh‐SpeedEthernet
Module
CustomerDefined Fiberopticcable N/A
2BASE
‐TLports CustomerDefined 25‐pairCAT‐524AWGshieldedcable CBL100‐0010‐11
10feet(3.0m)
CBL102‐0025‐12
25feet(7.6m)
CBL102‐0050‐12
50feet(15.2m)
CBL102‐0100‐12
100feet(30.5m)
10/100MGMTport** CustomerDefined CAT‐5eshieldedcable N/A
Alarmport** CustomerDefined CAT‐5eshieldedcable CBL100‐0010‐11

Hatteras HN4000 Specifications

General

Brand	Hatteras
Model	HN4000
Category	Switch
Language	English