84
_____________________________________________________________________
5.3 Setting Items
______________________________________________________________
Flashing cursor
OFF
Disables the print.
ON
Enables the print.
NOTE
When operating from the AC adapter, real-time printing requires
that the time axis range be no faster than 1 s/DIV.
When operating from the Battery Pack, real-time printing
requires that the time axis range be no faster than 2 s/DIV.
The printer cannot be used with alkaline batteries: use either the
9418-15 AC ADAPTER (SA145A-1240V-6, SINO
AMERICAN) or 9447 BATTERY PACK when using the
printer.
While recording, the printer always prints at the measurement
magnification ratio, while the screen display may be compressed
to the next ratio depending on the time axis range.
100 ms/DIV x1/10, 200 ms/DIV x1/5, 500 ms/DIV x1/2
5.3.7 Setting the Printer Function (Real Time
Printing)
This function is available when the 8992
PRINTER UNIT
is
connected. The input waveform is continuously printed in
real time.
Print density depends on the time axis range setting.
Procedure
Status Screen
1. Press the
SET
button to display the Status Screen.
2. Move the flashing cursor to
Printer
and set to on or off
using the
buttons.
To Next Page
Loading...
