Hioki 8807-01 - Setting the Printer Function; Printing)

105
_____________________________________________________________________
6.3 Setting Items
______________________________________________________________
Flashing cursor
OFF
Disables the print.
ON
Enables the print.
NOTE
When operating from the AC adapter, real-time printing requires
that the time axis range be no faster than 1 s/DIV.
When operating from the Battery Pack, real-time printing
requires that the time axis range be no faster than 2 s/DIV.
The printer cannot be used with alkaline batteries: use either the
9418-15 AC ADAPTER (SA145A-1240V-6, SINO
AMERICAN) or 9447 BATTERY PACK when using the
printer.
6.3.8 Setting the Printer Function (Real Time
Printing)
This function is available when the 8992 PRINTER UNIT
is connected. The input waveform is continuously printed in
real time.
Procedure
Status Screen
1. Press the
SET
button to display the Status Screen.
2. Move the flashing cursor to
Printer
and set to on or off
using the
buttons.