Hioki 8807-01 - Chapter 8 Trigger Functions; 8.1 Overview of the Trigger Function

137
_____________________________________________________________________
8.1 Overview of the Trigger Function
______________________________________________________________
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
APP
IND
Analog trigger
Logic trigger
External trigger
Timer trigger
The input signal to analog channels is used
as tri
gg
er source.
The input signal to logic channels is used
as tri
gg
er source
The input signal to the EXT TRIG terminal used
as tri
gg
er source.
Triggering occurs from a preset start time to
a
p
reset sto
p
time.
Manual trigger
Triggering occurs when the button is pressed.
Level trigger
Window-in trigger
Window-out trigger
Voltage drop trigger
Waveform detection
trigger
NOTE
Except for manual triggering, trigger sources can be logically
ANDed and ORed. Manu al triggering by the
button can be
executed regardless of any other trigger sources.
For details on the trigger for the harmonic wave analysis
function, refer to the supplement guide "Harmonic Wave
Analysis Function."
Chapter 8
Trigger Functions
8.1 Overview of the Trigger Function
The term "trigger" refers to a signal which is used to
control the timing for recording start or stop.
The term "triggering has occurred" refers to the state when
such a signal has activated recording start or stop.
Trigger parameters for the various functions are set using
the Trigger Screen or the Waveform Screen.