Hioki 8807-01 - Real Time Print (REC, RMS)

227
_____________________________________________________________________
11.6 Printing Procedure
______________________________________________________________
Flashing cursor
OFF
Disables the real time print.
ON
Enables the real time print.
NOTE
When operating from the AC adapter, real-time printing requires
that the time axis range be no faster than 1 s/DIV.
When operating from the Battery Pack, real-time printing
requires that the time axis range be no faster than 2 s/DIV.
The printer cannot be used with alkaline batteries: use either the
9418-15 AC ADAPTER (SA145A-1240V-6, SINO
AMERICAN) or 9447 BATTERY PACK when using the
printer.
11.6.3 Real Time Print (REC, RMS)
The input waveform and data are printed out continuously
in real time.
Procedure
Status Screen (REC, RMS)
1. Press the
SET
button to display the Status Screen.
2. Move the flashing cursor to
Printer
and use the buttons
to make a setting.
3. When measurement starts, waveforms are simultaneously
printed as they are displayed.