Hioki 8807-01 - Window-Out Trigger

152
_____________________________________________________________________
8.8 Internal Trigger
______________________________________________________________





Upper limit
Lower limit
Flashing cursor
Flashing cursor
8.8.3 Window-Out Trigger
Set upper limit level and lower limit level and activated
when the input signal leaves this range.
Procedure
Trigger Screen
1. Press the
SET
button to display the Trigger Screen.
2. Move the flashing cursor to the position shown in the
figure below and select
OUT
using the buttons.
3. Move the flashing cursor to the position shown in the
figure below, and set the lower limit of the trigger level
using the
buttons.