200
_____________________________________________________________________
10.4 Setting Screen
______________________________________________________________
10.4 Setting Screen
All settings of the present state are stored in internal
memory. Up to four states can be saved for later recall
when needed.
(1) Comment entry (enter comment of setting to be saved)
1. Press the
SYSTEM
button to display the Setting Screen.
2. Move the flashing cursor to the Comment entry position for
the number of the setting state to be entered.
Press the
button. A Comment Entry Screen appears.
For details refer to Section 11.3.3.
4. Press the
START
button to accept, or the
STOP
button to
cancel.
To Next Page
Loading...
