Hioki 8807-01 - Using the X-Y CONT Recorder

86
_____________________________________________________________________
5.4 Using the X-Y CONT Recorder
______________________________________________________________
5.4 Using the X-Y CONT Recorder
The same operation as a normal recorder is available to plot
between channels (real time X-Y recording).
Unlike an X-Y plot produced in the Memory recorder
function mode, the time axis information for each channel is
not being recorded.
When an analog channel is assigned to the X axis, the
remaining channels are automatically assigned to the Y axis.
With the 8808-01, 8808-51, when any analog channel is
assigned to the X-axis, a maximum of three X-Y combined
plots can be recorded.
For X-Y (Dot) the sampling period is fixed at 250 μs, while
for X-Y (Line) the fastest sampling period is 500 μs
(unfixed).
There is no limit on the length of a recording because
basically the operation is the same as that of a conventional
recorder.