22
_____________________________________________________________________
2.9 Attaching the Strap
______________________________________________________________
CAUTION
Attach the ends of the strap securely at both attachment
points. If the strap is not attached securely, the product
could drop while being carried.
Attachment Point
Stopper
2.9 Attaching the Strap
1. Insert each end of the strap through an attachment point
on the product.
2. Thread the end of the strap through the buckle twice as
shown below.
3. Finally, slide the stopper over the end of the strap.
Tighten the strap to remove slackness or twisting.
To Next Page
Loading...
