204
_____________________________________________________________________
10.5 Initialize Screen
______________________________________________________________
Flashing cursor
NOTE
Improvement in System Reset
The setup conditions and settings on communications (see 10.4, and
10.3.2) stored in the internal memory cannot be reset. To reset these
settings in the internal memory as well, turn on the power while
simultaneously holding down the
STOP
and
START
keys.
10.5.3 System Reset
Resets all settings to the factory default values.
The same effect can be achieved by turning power to the
product on while holding down the
STOP
button.
Procedure
Initialize Screen
1. Press the
SYSTEM
button to display the Initialize Screen.
2. Move the flashing cursor to
Execute
of System Reset item
and press the
buttons.
3. A confirmation window appears.
Press the
START
button to execute clearing, or press the
STOP
button to cancel.
To Next Page
Loading...
