Hioki 8807-01 - 3.1 Screen Display Buttons

26
_____________________________________________________________________
3.1 Screen Display Buttons
______________________________________________________________
SYSTEM
button
By pressing this button, you can select the
Environment, Comment, RS&COPY, Setting,
and Initialization Screens.
SET button By pressing this button, you can select the
Status, Channel, Trigger Screens.
DISP button Calls up the Waveform Screen.
Serves to display and observe waveforms.
Pressing this button from the Waveform
Screen switches to the DMM Screen.
SYSTEM
SET
DISP
PRINT button Serves to print out the measured data.
COPY button Prints a copy of the displayed screen, or to
save it as a BMP file.
(For output destination, refer to Section 10.3.)
FEED button Forwards the paper while the button is held
down.
PRINT
COPY
FEED
3.1 Screen Display Buttons
3.2 Printer Buttons
These buttons switch between the display screens.
These buttons are enabled when the 8992 PRINTER UNIT
is installed. For details, refer to Chapter 11.