187
_____________________________________________________________________
10.1 Environment Screen (SYSTEM)
______________________________________________________________
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
APP
IND
Flashing cursor
OFF
The Start Backup function is not used.
ON
The Start Backup function is used.
10.1.2 Start Backup
If the power supply is interrupted during recording operation
(while the
START
button LED is lit), and then the power
supply is restored, the product goes back into the
measurement operation mode, and recording is restarted
immediately. If the trigger function is used, the product goes
into trigger standby mode.
Procedure
Environment Screen
1. Press the
SYSTEM
button to display the Environment
Screen.
2. Move the flashing cursor to
Start Backup
and use the
buttons to make a setting.
To Next Page
Loading...
