Hioki 8807-01 - 12.3 Settings on the File Screen

240
_____________________________________________________________________
12.3 Settings on the File Screen
______________________________________________________________
Flashing cursor
Load
Load the data from a PC card.
Save
Save the data on a PC card.
Delete
Delete files or directories.
Make Dir
Create directories.
Format
Initialize a PC card.
Rename
Rename a file or directory name.
12.3 Settings on the File Screen
12.3.1 Loading the Data
The product settings or the measurement data are
transferred from the media to the memory of the product.
When loading measurement data, the channel can be
specified.
Data stored in the text format is not readable by the
product.
Harmonic wave analysis data that was saved by the 8807-
51, 8808-51 cannot be loaded into the 8807-01, 8808-01.
Procedure
File Screen
(1) Select the command to load.
1. Press the
CARD
button to display the File Screen.
2. Move the flashing cursor to the position shown in the
figure below and select
Load
using the buttons.