Hioki 8807-01 - Setting the Channel Screen (Printout)

224
_____________________________________________________________________
11.5 Setting the Channel Screen (printout)
______________________________________________________________
1
2
List
OFF :Waveform is not dis
p
la
y
ed
Red/Green Prints the waveform with normal
p
rint densit
y
.
Yellow/A
q
ua Prints the waveform with li
g
hter
p
rint densit
y
.
Blue/Gra
y
Prints the waveform with darker
p
rint densit
y
.
11.5 Setting the Channel Screen (printout)
Setting the Print Density (Section 7.3.1)
If the data is to be output on the 8992 PRINTER UNIT,
any of three print densities may be set for six waveform
display colors.
Printing density settings have no effect on real-time
printing.
Setting the waveform display graph (Refer to
Section 7.3.2)
When the display format is set to Dual or Quad on the
Status Screen, select the location of the waveform to be
printed.