108
_____________________________________________________________________
6.3 Setting Items
______________________________________________________________
Flashing cursor
Flashing cursor
NOTE
When external trigger (Ext Trig) is set to ON in the
instantaneous waveform trigger screen, instantaneous waveform
recording starts when a signal is input to the external trigger
terminal during measurement with the RMS recorder.
For details on external trigger, refer to Section 8.10.
(4) Display the Trigger Screen for the Instantaneous
Waveform Recording.
When setting the trigger for memory recording, the RMS
Recorder function must be selected and Instantaneous
Waveform Recording must be enabled.
1. Press the
SET
button to display the Trigger Screen.
2. Move the flashing cursor to
Mem Trig...
(instantaneous
waveform trigger setting) and display the Instant
(Instantaneous waveform trigger) Screen.
(5) Set the trigger for the Instantaneous Waveform
Recording. For details, refer to Chapter 8.
To return to the RMS Trigger Screen, move the flashing
cursor to
Back
, and press the buttons.
To Next Page
Loading...
