EasyManua.ls Logo

Hioki 8807-01 - Page 20

Hioki 8807-01
354 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
x
_____________________________________________________________________
Notes on Use
______________________________________________________________
(1) Before Powering On
Check that the 9418-15 AC ADAPTER (SA145A-1240V-6,
SINO AMERICAN), 9447 BATTERY PACK, or LR6
alkaline batteries are correctly fitted.
When using an AC adapter and if properly grounded three-
pin outlet is available, then using the three-core power cord
provides automatic grounding.
(2) Using the Printer
Avoid using the printer in hot, humid environments, as this
can greatly reduce printer life.
Printing is not possible if the recording paper is loaded
wrong-side up.
(3) Recording Paper
This product uses a thermal printer. The recording paper
supplied has characteristics finely tuned for use with the
printer.
Using recording paper of a different specification may not
only result in impaired printing quality, but even prevent
the printer from operating. Always use the 9234
RECORDING PAPER.
(4) Storage
Always place the product in the head-up condition when it
is stored for an extended period of time. If the product is
left idle for a long time with the head pressing on the roller,
the roller may be deformed, resulting in uneven printing.
(5) Shipment
Use the original packing materials when reshipping the
product, if possible.

Table of Contents

Related product manuals