Hioki 8807-01 - Page 287

263
_____________________________________________________________________
12.5 Text File Internal Format
______________________________________________________________
"COMMENT", "8807 REC DATA"
"DATE", "01-01-1999"
"TIME", "16:52:03"
"NUM_SIGS", 5
"INTERVAL", 2.500E-03
"HORZ_UNITS", "S"
"VERT_UNITS", "S", "V ", "V ", "V ", "V "
"SIGNAL", "TIME", "ACH1(Max)", "ACH1(Min)", "ACH2(Max)",
"ACH2(Min)"
"DATA"
0.0000E+00, -7.5000E+00, -8.7500E+00, +9.5000E+00, +8.0000E+00
+2.5000E-03, -6.2500E+00, -7.7500E+00, +8.5000E+00, +6.5000E+00
+5.0000E-03, -5.0000E+00, -6.5000E+00, +7.0000E+00, +5.5000E+00
+7.5000E-03, -3.7500E+00, -5.2500E+00, +6.0000E+00, +4.0000E+00
+1.0000E-02, -2.2500E+00, -4.0000E+00, +4.5000E+00, +2.5000E+00
+1.2500E-02, -5.0000E-01, -2.5000E+00, +3.0000E+00, +1.0000E+00
+1.5000E-02, +1.0000E+00, -1.0000E+00, +1.5000E+00, -1.0000E+00
+1.7500E-02, +2.5000E+00, +7.5000E-01, -5.0000E-01, -2.5000E+00
+2.0000E-02, +4.0000E+00, +2.2500E+00, -2.0000E+00, -4.0000E+00
+2.2500E-02, +5.5000E+00, +3.7500E+00, -3.5000E+00, -5.5000E+00
+2.5000E-02, +6.7500E+00, +5.0000E+00, -5.0000E+00, -6.5000E+00
NOTE
With the Recorder and RMS Recorder functions, sampling is
performed faster than the time axis on the screen (the Recorder
function samples at 400 kS/s, and the RMS Recorder samples at
4kS/s).
Input data is converted to sampling data corresponding to the
range to be displayed on the screen.
To save this data in the Recorder and RMS Recorder functions,
two values, the maximum and minimum, are stored in memory.
However, when data thinning is enabled, only the thinned data
is retained.
(2) The following example shows data has been saved by the
Recorder and RMS Recorder: