Hioki 8807-01 - Numerical Calculation Details

APPENDIX 8
______________________________________________________________________
Appendix 2 Reference
________________________________________________________________
n
AVE
=
Σ
di/n
i=1
AVE: average value
n: number of data samples
di: i-th data of the source channel
n
RMS = (
di
2
/n)
i=1
Σ
RMS: effective value
n: number of data samples
di: i-th data of the source channel
Numerical Calculation Details
(1) Average value
Calculates the average value (V) of the waveform data.
(2) Peak-to-peak value
Calculates the peak-to-peak (maximum-minimum) value of
the waveform data.
(3) Maximum value
Calculates the maximum value of the waveform.
(4) Time to maximum value
Calculates the time interval from the triggering point to the
maximum value of the waveform (in seconds).
If there are two maximum value points, the time to the first
point is calculated.
(5) Minimum value
Calculates the minimum value of the waveform.
(6) Time to minimum value
Calculates the time interval from the triggering point to the
minimum value of the waveform (in seconds).
If there are two minimum value points, the time to the first
point is calculated.
(7) RMS value
Calculates the RMS (effective) value of the waveform data.
When scaling is used, the value is calculated after scaling.