Hioki 8807-01 - Page 346

APPENDIX 20
______________________________________________________________________
Appendix 3 WaveViewer (Wv)
________________________________________________________________
Appendix 3.5 Converting Multiple Waveform
Files into CSV Files
You can convert multiple waveform files CSV files.
1. Select [
File
] from the menu bar, then select [
Batch
Conversion
] from the File menu.
2. Select the desired files from the file list. To select two or
more files, left-click on the desired files while holding
down the
Shift
or
Control
key.
3. If required, specify the sampling intervals in the [
ThinOut
]
box at which data is to be converted. Remember that not all
data needs to be converted. This setting is useful when you
need data over a broad time span.
4. In the [
Output Folder
], specify the folder in which to save
the CSV files converted from waveform files. You can
specify the desired folder without typing simply by clicking
on the [
<<Browse...
] button and selecting the desired folder
from the list.
5. To save in text formats other than CSV (space delimited or
tab delimited), select the desired format from the [Output
Format
]list.
6. Select [
Time Notation
] from among [
Sec
], [
Date
], [
Trig
],
and [
Point
].
7. Click the [
Convert
] button. All selected waveform files are
converted to CSV files and saved in the specified folder.