Hioki 8807-01 - Page 5

Chapter 5 Recorder Function 71
5.1 Overview of the Recorder Function 71
5.2 Operation Sequence (REC)
72
5.3 Setting Items 74
5.3.1 Setting the Function Mode 74
5.3.2 Setting the Time Axis Range
75
5.3.3 Setting the Recording Length
76
5.3.4 Setting the Display Layout
78
5.3.5 Setting the Auto Save Function
80
5.3.6 Setting the Print Mode
83
5.3.7 Setting the Printer Function
(Real Time Printing)
84
5.3.8 Setting the Display Clear Function
(X-Y only)
85
5.4 Using the X-Y CONT Recorder 86
5.5 Waveform Screen Settings (REC) 88
5.6 Start and Stop Operation (REC)
89
Chapter 6 RMS Recorder Function 91
6.1 Overview of the RMS Recorder Function 91
6.2 Operation Sequence (RMS) 92
6.3 Setting Items
94
6.3.1 Setting the Function Mode 94
6.3.2 Setting the Time Axis Range
95
6.3.3 Setting the Recording Length
96
6.3.4 Setting the Frequency
98
6.3.5 Setting the Display Layout
99
6.3.6 Setting the Auto Save Function
101
6.3.7 Setting the Print Mode
104
6.3.8 Setting the Printer Function (Real Time
Printing)
105
6.3.9 Instantaneous Waveform Recording
106
6.4 Waveform Screen Settings (RMS) 111
6.5 Settings on the Channel Screen (RMS) 112