Hioki 8807-01 - Page 81

57
_____________________________________________________________________
4.8 Extended Status Screen Setup (MEM)
______________________________________________________________
Flashing cursor
Flashing cursor
OFF
Disables the sequential save function.
ON
Enables the sequential save function.
Procedure
Extended Status Screen (MEM)
(1) Display the Extended Status Screen.
1. Press the
SET
button to display the Status Screen.
2. Move the flashing cursor to
Extended Status
... and press the
buttons to display the Extended Status Screen.
(2) Enable or disable the sequential saving function.
Move the flashing cursor to
Sequential Save
and set to ON
or OFF using the
buttons.