Hioki LR8431-20 - Page 48

3.2 Operating Flow Overview
40
Make other settings as needed.
 Entering channel comments (p. 60)
 Selecting channel display colors (p. 56)
 Setting the display range
Specifying the display position (p. 56)
Specifying upper and lower display limits (p. 57)
 Recording specific events (triggering) (p. 68)
 Setting alarm output (alarm function) (p. 73)
 Setting Unit Conversion (Scaling) (p. 58)
 Switching the monitor display (p. 24)
Configure input channel settings: [CH] screen
 Voltage measurement (p. 50)
 Temperature measurement 
(p. 51)
 Integration (pulse count) (p. 53)
 Revolution measurement
(p. 54)
Input Channel Settings