4.7 Setting Automatic Saving
107
Chapter 4 Setting the Measurement Conditions (When you want to customize the settings)
4
• Data equivalent to half the internal buffer memory will be stored after
"Yes" is selected in the "Do you want to remove the CF card/USB
memory? message. Replace the CF card or USB flash memory within
the time required to complete this action.
• If the recording interval is set to 100 s, media must be swapped out-
within 20 seconds.
• If a storage device is replaced during real-time saving, data is saved
to a new file.
• If measurement ends while the removable storage is ejected, even if a
removal storage is then inserted, the remaining data is lost.
To Next Page
Loading...
Need help?
General
