2.7 Using CF Card or USB Flash Drive (for Saving Data)
47
2
Chapter 2 Measurement Preparations
CF Card Insertion & Removal
Eject Button
Inserting a CF card
1 Open the CF card slot cover.
2 Press the Eject button in if it is in the
released position.
3 Face the CF card with the arrow mark
on top (
), and insert it in the direc-
tion of the arrow all the way in the slot.
Removing a CF card
1 Open the CF card slot cover.
2 Press the Eject button (to release it).
3 Press the Eject button again and pull
the card out.
Cover
Right side of
instrument
USB Flash Drive Insertion & Removal
The USB flash drive may not be recognized by the instrument depend-
ing on the USB flash drive used.
Inserting a USB flash drive
Confirm the orientation of the connection
parts of the USB flash drive and USB flash
drive port, and then insert the USB flash
drive all the way in.
Removing a USB flash drive
Pull the USB flash drive out.
See: "Replacing CF Card or USB Flash Drive dur-
ing Saving ([Realtime] only)" (p. 106)