Hioki MEMORY HiCORDER MR8880 User Manual

4.2 Recording Methods (Measurement Functions)
68
As recording methods, the instrument has two measurement functions, high speed
and real time. The internal processing for saving and printing and the setting items
on the measurement screen differ depending on the function.
The measurement function can be set on the Waveform screen and Setting screen
of the instrument.
4.2 Recording Methods
(Measurement Functions)
Select this function when you want to, for
example, measure waveforms that
change at high speed (instantaneous
waveforms) and unexpected transient
phenomena as you would with an oscillo-
scope.
Just the necessary measurement data
can be saved and printed after measure-
ment.
Select this function when you want to, for
example, measure fluctuations in low-
speed phenomena and fluctuations in the
effective value of a power supply over a
long period of time as you would with a
pen recorder or data logger.
Recording, saving, and printing can be
performed simultaneously with measure-
ment*.
High-speed Function
[Highspeed]
Real-time Function
[Realtime]
This measurement function is equivalent to
the Memory Recorder function of previous
Hioki Memory HiCorder models.
This measurement function is equivalent to
the Recorder function of previous Hioki Mem-
ory HiCorder models.
(*). Printing may not be possible at the same time de-
pending on the setting for the horizontal axis.
Waveform screen
[Setting] screen
Change the function
(Open/confirm the setting information.)

Hioki MEMORY HiCORDER MR8880 Specifications

General

Brand	Hioki
Model	MEMORY HiCORDER MR8880
Category	Voice Recorder
Language	English