Hioki MEMORY HiCORDER MR8880 User Manual

9.1 Starting & Stopping Measurement on a Specified Day
187
Chapter 9 Scheduling Measurement
9
You can schedule measurement to start and stop at specific times.
Before you configure these settings, confirm that the instrument clock is set to the
correct time. If it is not, set the clock again on the System screen.
(p. 204)
You can specify the desired days to start and stop measurement.
Scheduling
Measurement Chapter 9
9.1 Starting & Stopping Measurement on a
Specified Day
1
2
Apply
Select [Reservation].
5
When you want to set the current
time:
Select the clock mark ( ), and then
press the ENTER key.
3
Select [ ] (turn on) the check
box of the number (No.) for
which you want to configure the
schedule settings.
4 Set [Spc.Dt (Specified Date)] in
[Type] for the schedule.
5 Set the date and time you want
to start and stop measurement.
Set each of year-month-day, hour,
and minute.
4
Change 1’s digit
Change 10’s digit
Apply
Select the setting field
3
Setting the date and time
Select
Select the [Setting] screen.

Hioki MEMORY HiCORDER MR8880 Specifications

General

Brand	Hioki
Model	MEMORY HiCORDER MR8880
Category	Voice Recorder
Language	English