8.1 Calculation Methods
177
Chapter 8 Numerical Calculations
8
Calculations can be applied to measured data.
The operation differs depending on the function ([Highspeed]/[Realtime]). Up to four
calculations can be performed at one time.
Types of calculations
∗. This cannot be set when [Envelope: On].
See: "8.4 Numerical Value Calculation Expressions" (p. 184)
Numerical
Calculations Chapter 8
8.1 Calculation Methods
Types
High-
speed
Realtime
Average value
Average value of waveform data
z z *
Peak value
Peak-to-peak value of waveform data
z z
Maximum value
Maximum value of waveform data
z z
Time to maximum value
Time elapsed from the start of measure-
ment to the maximum value
z z
Minimum value
Minimum value of waveform data
z z
Time to minimum value
Time elapsed from the start of measure-
ment to the minimum value
z z
RMS value
RMS value of waveform data
z
−
Period
Period of signal waveform
z
−
Frequency
Frequency of signal waveform
z
−
Area value
Area enclosed by the zero position and
signal waveform
z
−
X-Y area value
Area for X-Y synthesis
z
−
To Next Page
Loading...
