Hioki MEMORY HiCORDER MR8880 - Converting Measurement Values (Scaling Function)

4.6 Setting the Screen Display
97
Chapter 4 Setting the Measurement Conditions (When you want to customize the settings)
4
Input voltage values can be converted to physical
units for display, such as by converting voltage to
current. Preset scaling settings are provided for cur
-
rent measurement with the optional clamp sensor
models.
Converting Measurement Values (Scaling Function)
Normal
Display (Off)
Scaling Enabled
A mV
1
2
Select the display format for after scal-
ing in [Scaling].
Setting options (∗. default setting)
Off∗ Scaling is not performed.
Dec Displays values in decimal notation after scaling.
Exp Displays values in exponential notation after scaling.
(Open/confirm the setting information.)
3
Setting options (∗. default setting)
Ratio∗, 2-Point, Model, Rate
(Open/confirm the setting information.)
Select the conversion method for scaling.
23
Select the [CH] screen.