6.2 Saving Data
151
Chapter 6 Managing Data
6
When [Quick Save] and [Select & Save] (Real-time Function)
• [Quick Save] and [Select & Save] can save
the data remaining in the internal buffer memory
(up to the last 1 Mword).
If you want to save data that exceeds 1 Mword,
set [Cont (Continuous Recording)] to [On] and
[Realtime Save] to [Waveform (Real time)]
before performing measurement.
• Data can only be saved with [Quick Save] and [Select & Save] when
measurement is stopped. Saving is not possible during measurement.
(Both waveform data and display images)
To save a waveform partially, specify a period by using A/B cursors. (Saving a
waveform section is not available with Auto Save) (p. 140)
To save a screen image, display the desired screen before saving.
To Next Page
Loading...
