Hioki MEMORY HiCORDER MR8880 - Page 163

6.2 Saving Data
153
Chapter 6 Managing Data
6
Select [Yes] in the confirmation
dialog, and press ENTER.
• Numerical calculation must be config-
ured in order to save calculation results
(p. 177)
• When a save span is specified for calcu-
lation results, the results are saved for
the specified span.
Before saving a partial waveform,
specify the span to be saved (p. 140)
Select the save format and
range, select [Save], and press
the ENTER key.
Select [Yes] in the confirmation dia-
log, and press ENTER.
Select [Waveform], and press the
ENTER key.
Select [Screen Image] or [Calc
Results], and press the ENTER key.