Hioki MEMORY HiCORDER MR8880 - Page 190

8.2 Calculating Automatically (Auto Calculation)
180
6
Set automatic saving to automatically save calculation results.
Select the type of automatic saving (p. 102).
Select any of the following.
• [Calc(after meas.)]
• [Waveform + Calc]
•[CSV + Calc]
You can save the calculation values at the
specified interval (p. 181).
7 Start measurement.
8 Select [Wave + Calc] display in the waveform
screen.
The numerical calculation results appear.
The results for the selected calculation
number appear.