Operating Precautions
11
About installation procedure: "2.1 Using the Alkaline Battery Box (Accessory)
or Battery Pack (Option)" (p. 32)
• Use only the specified connection cables. Using a non-specified cable
may result in incorrect measurements due to poor connection or other
reasons.
• Before using a clamp sensor or logic probe, read the instruction man-
ual supplied with it.
Alkaline Battery Box (Accessory) and Battery Pack (Option)
Be sure to observe the following precautions. Incorrect handling
may result in liquid leaks, heat generation, ignition, bursting and
other hazards.
• For the battery pack, use the optional Z1000 Battery Pack. We do
not take any responsibility for accidents or damage related to the
use of any other batteries.
• When using the alkaline battery box, use commercially available
eight LR6 alkaline batteries.
• To avoid the possibility of explosion, do not short circuit, disas-
semble or incinerate battery pack/battery. Handle and dispose of
batteries in accordance with local regulations.
• When storing the instrument, make sure no objects that could
short-circuit the connectors are placed near them.
• The battery pack and alkaline dry cell batteries contain lye,
which can cause blindness if comes into contact with the eyes.
Should battery liquid get into your eyes, do not rub your eyes
but rinse them in plenty of water and seek the immediate atten
-
tion of a physician.
• To avoid electric shock, turn off the power switch and discon-
nect the cables before replacing the batteries or battery pack.
• After installing or replacing the batteries or battery pack, replace
the battery compartment cover and screws.
• Handle and dispose of batteries or battery pack in accordance
with local regulations.
To Next Page
Loading...
Need help?
General
