Hisun HS200UTV - Changing the Headlight Bulb Ⅰ

-120-
MAINTENCE AND ADJUSTMENT OF THE UTV
- 120 -
CHANGING THE HEADLIGHT BULBⅠ
Remove:
• Lift the hood up.
• headlight bulb holder cover ①
• headlight bulb holder (with bulb) ①
• bulb
NOTE:
Turn left the defective bulb by unhooking the
headlight bulb holder tabs ②
WARNING :
Keep flammable products and your hands away
from the bulb while it is on, since it will be hot.
Do not touch the bulb until it cools down.
.
MAINTENCE AND ADJUSTMENT OF THE UTV
- 121 -
1. Install:
• bulb new
Secure the new bulb with the headlight bulb
holder.
NOTE:
Avoid touching the glass part of the bulb. Keep
it free from oil; otherwise, the transparency of
the glass, life of the bulb, and luminous flux will
be adversely affected. If oil gets on the bulb,
thoroughly clean it with a cloth moistened with
alcohol or lacquer thinner.
• headlight bulb holder (with bulb)
• headlight bulb holder cover
• Close the hood.
CHANGING THE HEADLIGHT BULBⅡ
Remove:
• Lift the hood up.
• headlight bulb holder cover ①
• headlight bulb holder (with bulb) ①
• bulb
NOTE:
Turn on the defective bulb by unhooking the
headlight bulb holder tabs