Hisun HS200UTV - Chapter 3; Adjusting the Valve Clearance

-83-
MAINTENANCE AND ADJUSTMENT OF THE UTV
- 83 -
ENGINE
Adjusting the valve clearance
NOTE:
·The valve clearance must be adjusted when the
engine is cool to the touch.
·
A
djust the valve clearance when the piston is at
the Top Dead Center TDC on the compression
stroke.
·
Remove:
·driver seat
·
passenger seat
·engine cover board
1. Remove following parts：
① spark plug
② air-intake valve cover
③ exhaust valve cover
④ timing chain cover
⑤ small hand hole cover
⑥ big hand hole cover