EasyManua.ls Logo

Hisun HS200UTV - Starting Failure;Hard Starting

Hisun HS200UTV
312 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
-283-
TROUBLESHOOTING
- 283 -
NOTE:
The following trouble, not including all possible troubles, is a help for trouble guide. Please refer to
relevent contents for the inspection, adjustment and replacement of part.
STARTING FAILURE/HARD STARTING
FUEL SYSTEM
Fuel tank
1No oil
2Fuel filter is clogged
3Fuel pump filter net is clogged
4Breather tube is clogged
5Fuel is deteriorated or polluted
Fuel pump
1Clogged fuel hose
2Damaged vacuum hose
Air filter Clogged air filter element
Gasoline filter Block up
ELECTRICAL SYSTEM
Spark plug
1Improper plug gap
2Worn electrodes
3Wire between terminals broken
4Wrong Spark plug heat value
5Faulty spark plug cap
6. High voltage wires strapped on frame cause shortage of high
pressure ignition energy
EFI system
1 Broken ECU
2 Clogged nozzle or the rupture the line from nozzle to ECU
3 Damage of engine speed signal sensor
4 Rupture of the line from engine speed signal sensor to ECU
5 Broken inlet pressure or temperature sensor or damaged line
to ECU
6 Broken air throttle or damage line to ECU.
7Broken vice line (cable) of electrical injection
Switches and wires
1 Broken main cable
2 Broken main switch

Table of Contents

Related product manuals