WARNING
:
Keep flammable products and your hands away
from the bulb while it is on, since it will be hot.
Do not touch the bulb until it cools down.
1. Install:
• bulb new
Secure the new bulb with the headlight bulb
holder.
NOTE:
Avoid touching the glass part of the bulb. Keep
it free from oil; otherwise, the transparency of
the glass, life of the bulb, and luminous flux will
be adversely affected. If oil gets on the bulb,
thoroughly clean it with a cloth moistened with
alcohol or lacquer thinner.
• headlight bulb holder (with bulb)
• headlight bulb holder cover
• Close the hood.
CHANGING THE TAIL/BRAKE LIGHT BULB
1. Remove:
• Tail/brake light bulb holder(with bulb)①
• Secure the new bulb with the tail/brake light bulb
holder.
• tail/brake light bulb holder (with bulb) ①
• bulb
NOTE:
Turn the bulb holder counterclockwise and
remove the defective bulb.
WARNING
:
Keep flammable products and your hands away
from the bulb while it is on, since it will be hot.
Do not touch the bulb until it cools down.
MAINTENCE AND ADJUSTMENT OF THE UTV
- 123 -
2. Install:
• bulb new
Secure the new bulb with the tail/brake light bulb
holder.
NOTE:
Avoid touching the glass part of the bulb. Keep
it free from oil; otherwise, the transparency of
the glass, life of the bulb, and luminous flux will
be adversely affected. If oil gets on the bulb,
thoroughly clean it with a cloth moistened with
alcohol or lacquer thinner.
• tail/brake light bulb holder (with bulb)
To Next Page
Loading...
