5
Off tracking by braking at
high-speed
5. Check whether front wheel hub inner spline and front
wheel axle outer spline worn or loosen.
6. Check whether rubber cushion connected to front
suspension rocker and frame damaged.
Other system malfunction inspection
No. Phenomenon Measure
1
Steering wheel loosen, shift
up and down
1. Check whether steering wheel clip loosen or damaged.
2. Check whether steering column clip and clip seat loosen
or damaged.
2
Front wheel steering
clearance excessive
1. Check whether tie-rod and steering column locknut
loosen or damaged, or steering knuckle and steering
column locknut loosen or damaged.
2. Check whether tie-rod two ball joint damaged.
3 Front wheel sway during drive
1. Check whether steering knuckle bearing damaged.
2. Check whether king pin ball joint damaged.
3. Check whether front wheel and axle locknut loosen or
damaged.
4. Check whether front wheel hub inner spline and front
wheel axle outer spline worn or loosen.
5. Check whether rubber cushion connected to front
suspension rocker and frame damaged.
4
Rear wheel sway during drive
1. Check whether rear axle bearing damaged.
2. Check whether rear wheel and axle locknut loosen or
damaged.
3. Check whether rear wheel hub inner spline and rear
wheel axle outer spline worn or loosen.
4. Check whether rubber cushion connected to rear
suspension rocker and frame damaged.
5 Wheel hop during drive
1. Check whether wheel rim deformed.
2. Check whether front and rear axles bent.
3. Check whether tyre aging and deformed.
6
Absorber become soft and
comfortability depressed
1. Check whether over loading.
2. Check whether absorber spring become soft.
3. Check whether absorber lost of damping force
incompression and prolongation.
To Next Page
Loading...
