Front Suspension and arm
●Check whether these components are greased
with butter and then tighten the up-and-down
rocker arm assembly and L/R fore dampers
and the components. Fix the L/R tension rods
into hole by way of the trough of open-groove
nut with cotter pin, and make these tension rods
bisection on feet.
CHECKING THE BALANCE LEVER
1. Check:
•
Balance lever
Bends/cracks/damage
Replace.
CHECKING THE FRONT ARMS
1. Check:
• front arms
Bends/damage
Replace.
2. Check:
• bushing
Wear/damage
Replace.
3. Check:
• Axle sleeve, liner
Damage/pitting
Replace the axle sleeve,
liner
Free play
Replace the axle sleeve,
liner
Turns roughly
Replace the axle sleeve,
liner
To Next Page
Loading...
