Hitachi Compute Blade 500 Series - Page 121

User name
The following characters and the number of characters are available for user
names.
Table 2-93 User name
Item Description
Number of characters From 1 to 32 characters
Available characters for the head of a name [A-Z] [a-z]
Available characters for from the second to
the end of a name
[A-Z] [a-z] [0-9], "-" (hyphen), "_"
(underscore), "." (period)
Password
The following characters and the number of characters are available for
passwords.
Table 2-94 Password
Item Description
Number of characters From 1 to 32 characters
Available characters Printable characters in ASCII (0x20-0x7e)
Tip: The complexity of passwords depends on the security policy of your
Windows server.
Granting Role Information
By granting role information to a user account registered with the LDAP
directory, you can set the range of operations to be performed after the login.
Tip: If you do not grant role information, operations you can perform after
the login are minimized.
Follow the procedure below to assign role information.
1. Select Start > Run…, type mmc
and click OK.
Functional detail
2-97
Hitachi Compute Blade 500 Series Management Module Setup Guide