EasyManuals Logo

Hitachi Compute Blade 500 Series Management Module Setup Guide

Hitachi Compute Blade 500 Series
362 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #91 background imageLoading...
Page #91 background image
Note:
•
HTTPS must be enabled in HCSM linkage. See
Security on page 2-26 for
HTTPS settings and how to change them.
•
When Security strength is set to high or when Security strength is set to
default and communication is enabled only with TLS 1.2, connection with
HCSM not supporting TLS 1.2 is not available. See HCSM instruction
manuals for the operation.
• When the port number used for HTTPS communication is changed from
443 in the HCSM setting, change the port number used for the
management module to the same number as HCSM. To change the port
number used for the management module, change the port number for
HTTPS, which is a service provided by management modules.
HCSM discovery
HCSM has a feature, hereinafter referred to as Discovery, to detect system
units in the managed network. System administrator can add all system units
in the network to managed resources by executing Discovery with HCSM user
interface. When specifying system units as managed resources, HCSM
registers itself into the management module of the system units. You can find
HCSM information registered on the management module using Discovery on
the Web console and CLI console.
Tip: When four HCSMs have been registered in a management module, the
system unit with the management module cannot be a target if you execute
Discovery on HCSM other than that registered in the management module.
Table 2-77 Web console operation
Item Operation
HCSM information and settings Administration tab > HCSM
Table 2-78 CLI console operation
Item Operation
Showing HCSM information show hcsm setting
Setting HCSM information set hcsm manager
Deleting HCSM information delete hcsm manager
HCSM options
This subsection describes option settings for management modules to link to
HCSM.
By configuring the network for management modules, and then discovering
and adding resources by using the HCSM user interface, you can link the
Functional detail
2-67
Hitachi Compute Blade 500 Series Management Module Setup Guide

Table of Contents

Other manuals for Hitachi Compute Blade 500 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hitachi Compute Blade 500 Series and is the answer not in the manual?

Hitachi Compute Blade 500 Series Specifications

General IconGeneral
BrandHitachi
ModelCompute Blade 500 Series
CategoryServer
LanguageEnglish

Related product manuals