Hitachi Compute Blade 500 Series Management Module Setup Guide

Code Message Description Action
E0411 <Address %> Sending e-
mail notification was
canceled. A communication
error occurred.
Error occurred during the
communication with the
SMTP server.
Confirm the LAN
connection.
E0412 <Address %> Sending e-
mail notification was
canceled. Connecting to
SMTP server failed.
Connection failed to the
SMTP server.
Confirm all of the
settings for E-mail,
SMTP server status,
and the LAN
connection.
E0413 <Address %> Sending e-
mail notification was
canceled. Failed to resolve
host.
IP address is not
identified from the SMTP
server host name.
Confirm the sender
setting for E-mail, DNS,
and the LAN
connection.
E0414 <Address %> Sending e-
mail notification was
canceled. Configuration is
invalid.
The format error exists in
IP-address for SMTP
server.
Confirm the sender
setting for E-mail.
E0415 <Address %> Sending e-
mail notification was
canceled. SMTP server does
not support requested
authentication type.
The SMTP server does
not support the
designated authentication
method.
Confirm the notification
setting (authentication
method).
E0416 <Address %> Sending e-
mail notification was
canceled. SMTP
authentication failed.
An error detected in the
authentication account or
password.
Confirm the
authentication account
and password.
E0417 <Address %> Sending e-
mail notification was
canceled. SMTP server does
not support SSL/TLS.
The SMTP server does
not support the
designated encryption
method.
Confirm the notification
setting (encryption
method).
E0418 <Address %> Sending e-
mail notification was
canceled. Program failed.
Unexpected error
occurred.
Contact with your
customer engineer or
sales personnel.
E0419 <Address %> Sending e-
mail notification was
canceled. E-mail address is
invalid.
The failure exists in
destination address
setting, or no user exists
corresponding to the
address.
Confirm the destination
address setting.
Syslog transfer
This section describes Syslog transfer function for management modules and
BMC.
Overview
Management modules and BMC can transfer events of user operation,
hereinafter referred to as Audit event, to a syslog server. You can integrate
2-244
Functional detail
Hitachi Compute Blade 500 Series Management Module Setup Guide

Hitachi Compute Blade 500 Series Specifications

General

Brand	Hitachi
Model	Compute Blade 500 Series
Category	Server
Language	English