Hitachi Compute Blade 500 Series - Starting MegaRAID WebBIOS

Initializing LPAR manager configuration
Perform the following procedure for initializing LPAR manager configuration.
Here, "LPAR manager configuration" is called "LPAR manager setting". When
a server blade is turned off, an LPAR manager setting can be initialized.
When an LPAR manager setting is initialized, LPAR manager configuration
information is lost. So, it is recommended that LPAR manager configuration
information is backed up before initializing an LPAR manager setting.
1. Click Resources.
2. Click Modules
> Right pointing triangle to All Modules then Server
Blades > target server blade.
2-190
Functional detail
Hitachi Compute Blade 500 Series Management Module Setup Guide