Deactivating LPAR
Perform the following procedure for deactivating LPAR. When an LPAR is
deactivated, a guest OS operating on the LPAR is shut down forcibly. So, be
sure to confirm the state of the guest OS before deactivating an LPAR. On the
other hand, when a guest OS is shut down properly, execute the operation
for shutdown on the guest OS.
1. Click Resources.
2. Click Modules > Right pointing triangle to All Modules then Server
Blades > target server blade.
2-170
Functional detail
Hitachi Compute Blade 500 Series Management Module Setup Guide
To Next Page
Loading...
