Hitachi Compute Blade 500 Series - Requirement; Configuring SNMP

The following table shows the specification of SNMPv3.
Table 2-121 Specification of SNMPv3
Item Specification
Authentication (Hash method) MD5/SHA-1
Encryption DES/AES128
Requirement
•
SNMP manager that receives SNMP trap must support SNMPv1/v2c/v3.
• The network communication must be available between the management
module and the SNMP manager on management server.
Configuring SNMP
The following procedure indicates the configuration steps to use SNMP on the
management module.
Exporting MIB file
You can export the MIB file to manage the system unit from the management
module console.
When the firmware for management module is updated and new OID is
added, export the MIB after the update. The MIB version to be exported is
also confirmed from the management module console.
Table 2-122 Web console operation
Item Operation
Exporting MIB Administration
tab > SNMP > MIB tab > Download MIB file
button
Displaying MIB version Administration tab > SNMP > MIB tab
Functional detail
2-235
Hitachi Compute Blade 500 Series Management Module Setup Guide