Turning on system unit
The system unit boot up automatically when turn on AC. The server blade can
boot to synchronize the system unit by the setting of system unit. For details,
see Server blade operation setting when power failure recovery on page
2-43.
Turning off system unit
When turn off the system unit, operate the management module to turn off.
Turn off the system unit after turning off all server blades. The following
tables describe turning off the system unit.
Table 2-47 Web console operation
Item Operation
Shutting down the system
unit
Resources tab > Modules > All modules > Chassis >
Action tab > Shutdown
Table 2-48 CLI console command
Item Command
Shutting down the system unit
Shutdown chassis
Table 2-49 LCD touch console operation
Item Operation
Shutting down the system unit Hardware maintenance > Server Chassis (SC) >
Chassis shutdown
Operating power supply for server blade
You can operate relating to the power supply of server blade by the
management module. The following tables describe the operating power
supply.
•
Power ON
• Power OFF
• Force power OFF
• Hard reset
• Issue NMI
• Restart BMC
Note:
•
Turning off may not perform depend on the OS type/status of the server
blade. We recommend that turn off the server blade from the OS or
ServerConductor.
2-42
Functional detail
Hitachi Compute Blade 500 Series Management Module Setup Guide
To Next Page
Loading...
