Hitachi Compute Blade 500 Series - Operation Log and Audit Log Messages

Item Descriptions Remarks
Batch operation
identifier
(BatchID)
This information is not recorded in this
equipment.
Log type information
(LogCateg)
This information is not recorded in this
equipment.
Application identification
information
(AppID)
This information is not recorded in this
equipment.
Reserved area
(Reserv)
This information is not recorded in this
equipment.
Message
(message)
Operation messages are recorded. This corresponds to
the message item of
the operation log.
Tip:
•
The each item has variable length.
• The items are divided by a comma, and each line is terminated by a CR
and a LF code.
• The message is enclosed in double quotation marks.
Operation log and audit log messages
The lowing table shows the operation logs and audit logs for a management
module and server blade.
Table 2-149 Operation log and audit log
ID
Operation
category
Recording trigger Message
Operation log message for management module
0802 Start/Stop Request of
management module
operation.
On Management module N,
requested operation.
Channel:xxx Method:xxx
0803 Failure on requesting
management module
operation.
On Management module N, failed to
requested operation.
Channel:xxx Method:xxx
0804 Request of unit
shutdown.
On Server chassis, requested
shutdown. Channel:xxx
0805 Failure on requesting
unit shutdown.
On Server chassis, failed to
requested shutdown. Channel:xxx
0806 Request of switch
module operation.
On Switch module N, requested
operation.
2-270
Functional detail
Hitachi Compute Blade 500 Series Management Module Setup Guide